Cleaning Equipment After Installation

Installer - If you need to clean equipment after installation, please use the following guidelines.

WARNING

Failure to heed the following may result in injury or death.

Possible electric shock hazard - Deactivate power to all electrical devices on the pad when washing heat pump. Do not restore electrical power until equipment is completely dry.

NOTICE

Failure to heed the following may result in damage to equipment.

Do not use a pressure cleaner to wash heat pump. Damage to heat pump components may result. If using a hose-end spray nozzle adjust spray pattern to low strength only.
Do not spray water directly into the interior of the heat pump; damage to components may result.
Do not use chemicals on the display panel.

Cleaning

Wash outside cabinet using a low-pressure water hose.
While the heat pump is still wet, use an approved cleaning agent to clean the exterior of the heat pump. Do not use chemicals on the display panel.
Use a detergent-dampened cloth to wipe the heat pump's exterior cabinet.
Flush all exterior with fresh water using a low-pressure water hose.
Dry the exterior cabinet using a soft cloth.

Table 5 - Cleaning Agents
APPROVED CLEANING AGENTS^•
Fantastic^®
Formula 409^®
Cascade^®
All Power Plain Detergent (3% Solution)

^•	The trademarks used in approved cleaning agents are property of their owners and are not related to AquaCal^®.

Polishing

Polish the heat pump's cabinet panels using an approved polishing agent and following the manufacturer’s instructions. Do not use chemicals on the display panel.
Rinse the heat pump panels with fresh water, wipe, and buff panels using a dry soft cloth.
Allow heat pump interior and surrounding equipment to "air-dry" for several hours prior to restoring electrical power.

^•	The trademarks used in approved polishing agents are property of their owners and are not related to AquaCal^®.